General Description
Soler Enclosed conductor rail system is a conductor, protected from
contact (IP23),for indoor and outdoor plants. They are conductor
lines in a rigid green PVC housingwith different copper cross
sections for rated currents of 35-240A.
The current collectors, running in ball bearings, are guided by the
housing.
The main is transferred by spring-stored carbon brushes.
Type HFP-P:not include Sealing strip, with factory-mounted flat
copper band and bolted-operated plug connectors.
Type HFP-R:Curves for R≥800mm,with factory-mounted flat copper band
and screw connectors.
Approved and listed by: CCC,ISO9001 and CE.
| Type | Weight(kg) | Remark [Be used for] |
| 56CB-1 | 0.04 | 56JD series collector |
| 56CB-2 | 0.04 | 56JDR series collector |
System photo
Technical data
| Electrical properties: | Mechanical properties: |
| Max.current:240A | Flexible strength: 75N/mm2±10% |
| Max.voltage:690V | Tensile strength: 75N/mm2±10% |
| Dielectric strength:30-40KV/mm | Temperature range: |
| Spec.resistance:5x1015Ohmxcm | Standard Housing:-20°C up to +70°C |
| Surface resistivity:1013Ohmxcm | High Temp.Housing: -10°C up to +115°C |
| Leakage resistance:CT1600-2.7 | Low Temp.Housing: -40°C up to +80°C |
| Combustibility: |
| Flame retardant: Class B1-no flaming particles,self-extinguishing |
| Self extinguishing: Class B1-no flaming
particles,self-extinguishing |
Resistance to chemicals:+45°C Gasoline Sulphuric acid 50% Mineral Oil Caustic soda 25%&50% Grease Hydro-chloric acid, concentrated |
Housing:
Color green, plastic housing for 3-4 conductors. Standard section
4m.Other sections are available.
The ground conductor is identified by international color code.
Phase reversing prevented by design of the collector and housing.
Connection:
Through plastic joint caps
Feed Sets:
Line feeds or end feeds
End caps:
The open ends of the powerail are closed by end caps for HFP56.
Hangers:
Standard brackets for powerail attachment to crane girders are
available .
Powerail with sliding and fixpoint hangers.
Standard distance between suspension points for indoor and outdoor.
Installations:1200mm.
Expansion during temperature fluctuation
The Expansion sections are required to compensate the different
expansions between copper conductors and steel or concrete
structures, in varying temperatures without interrupting electrical
power.
Anti-condensation sections
These sections are used for transfer of the Powerail to outdoor
areas to avoid condensation. The Powerail is not separated
electrically.
Sectioning
Available as air gap version(5mm),where the collector carbon
bridges the gap, e.g. for mains. Also available as insulating piece
version(35mm). In this case the insulating piece is longer than the
carbon and each Powerail section can be separated electrically,
e.g. for control.
Current collectors:
The current collectors are made of re-inforced polyester
fiberglass, for high strength and light weight. Spring loaded
carbon brushes maintain uniform contact. Connecting cables and
hinged or flexible towing arms included. Double collectors for
transfer applications and higher amperage.
